Double crawler shaping machine host double crawler machine and related guidance system double crawler host is a crawler machine designed and manufactured by our company based on many years of mechanical design experience and on-site actual operation feedback. The length of the entire host is 16 meters, 24 meters, or 32 meters (length optional), and is connected by low alloy chain plates with a width of 1320mm. The upper track is raised and lowered through a hydraulic cylinder or ball screw and guide mechanisms on both sides. The specific structure is as follows: 1. The frame is welded with high-quality thick-walled steel, which has the characteristics of high strength and small deformation. The double track chain plate is integrally welded and processed by CNC machine tools, which has the characteristics of high strength and high surface smoothness; 2. The entire The bearings of the chain plate adopt rolling friction transmission, and the driven shaft can adjust the tension or relaxation of the crawler track; 3. The upper crawler track is raised and lowered through a hydraulic cylinder or ball screw. The distance between the upper and lower crawler tracks is 40mm-200mm. There are Lifting guide mechanism. 4. The nylon stops on both sides can be adjusted according to different plate widths, and the adjustment distance is 500mm-1200mm; 5. Using a spiral gear reducer and a variable frequency synchronous motor to drive up and down synchronously, the synchronous operation control of the upper chain plate can be realized. The speed of the main machine is 0-8.8m/min, which can be adjusted by stepless frequency conversion; 6. The blocks on both sides are used to seal the sandwich panel, and the width of the panel and the movement speed of the guide block are controlled through a three-phase motor, and the speed is displayed through a digital display , there is a set of motion guide mechanisms on each side. According to the thickness of the plate required by the customer, we provide the corresponding nylon stopper outline and size design. 7. The control of the double crawler host is through PLC programming and panel adjustment control operation; 8. The equipment is equipped with an electric heating system that heats the upper and lower crawlers through hot air.